rustmax::std::cmp

Trait PartialEq

1.0.0 · Source

pub trait PartialEq<Rhs = Self>where
    Rhs: ?Sized,{
    // Required method
    fn eq(&self, other: &Rhs) -> bool;

    // Provided method
    fn ne(&self, other: &Rhs) -> bool { ... }
}

Expand description

Trait for comparisons using the equality operator.

Implementing this trait for types provides the == and != operators for those types.

x.eq(y) can also be written x == y, and x.ne(y) can be written x != y. We use the easier-to-read infix notation in the remainder of this documentation.

This trait allows for comparisons using the equality operator, for types that do not have a full equivalence relation. For example, in floating point numbers NaN != NaN, so floating point types implement PartialEq but not Eq. Formally speaking, when Rhs == Self, this trait corresponds to a partial equivalence relation.

Implementations must ensure that eq and ne are consistent with each other:

a != b if and only if !(a == b).

The default implementation of ne provides this consistency and is almost always sufficient. It should not be overridden without very good reason.

If PartialOrd or Ord are also implemented for Self and Rhs, their methods must also be consistent with PartialEq (see the documentation of those traits for the exact requirements). It’s easy to accidentally make them disagree by deriving some of the traits and manually implementing others.

The equality relation == must satisfy the following conditions (for all a, b, c of type A, B, C):

Symmetry: if A: PartialEq and B: PartialEq<A>, then a == b implies b == a; and
Transitivity: if A: PartialEq and B: PartialEq<C> and A: PartialEq<C>, then a == b and b == c implies a == c. This must also work for longer chains, such as when A: PartialEq, B: PartialEq<C>, C: PartialEq<D>, and A: PartialEq<D> all exist.

Note that the B: PartialEq<A> (symmetric) and A: PartialEq<C> (transitive) impls are not forced to exist, but these requirements apply whenever they do exist.

Violating these requirements is a logic error. The behavior resulting from a logic error is not specified, but users of the trait must ensure that such logic errors do not result in undefined behavior. This means that unsafe code must not rely on the correctness of these methods.

§Cross-crate considerations

Upholding the requirements stated above can become tricky when one crate implements PartialEq for a type of another crate (i.e., to allow comparing one of its own types with a type from the standard library). The recommendation is to never implement this trait for a foreign type. In other words, such a crate should do impl PartialEq<ForeignType> for LocalType, but it should not do impl PartialEq<LocalType> for ForeignType.

This avoids the problem of transitive chains that criss-cross crate boundaries: for all local types T, you may assume that no other crate will add impls that allow comparing T == U. In other words, if other crates add impls that allow building longer transitive chains U1 == ... == T == V1 == ..., then all the types that appear to the right of T must be types that the crate defining T already knows about. This rules out transitive chains where downstream crates can add new impls that “stitch together” comparisons of foreign types in ways that violate transitivity.

Not having such foreign impls also avoids forward compatibility issues where one crate adding more PartialEq implementations can cause build failures in downstream crates.

§Derivable

This trait can be used with #[derive]. When derived on structs, two instances are equal if all fields are equal, and not equal if any fields are not equal. When derived on enums, two instances are equal if they are the same variant and all fields are equal.

§How can I implement `PartialEq`?

An example implementation for a domain in which two books are considered the same book if their ISBN matches, even if the formats differ:

enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq for Book {
    fn eq(&self, other: &Self) -> bool {
        self.isbn == other.isbn
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };
let b2 = Book { isbn: 3, format: BookFormat::Ebook };
let b3 = Book { isbn: 10, format: BookFormat::Paperback };

assert!(b1 == b2);
assert!(b1 != b3);

§How can I compare two different types?

The type you can compare with is controlled by PartialEq’s type parameter. For example, let’s tweak our previous code a bit:

// The derive implements <BookFormat> == <BookFormat> comparisons
#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

// Implement <Book> == <BookFormat> comparisons
impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

// Implement <BookFormat> == <Book> comparisons
impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };

assert!(b1 == BookFormat::Paperback);
assert!(BookFormat::Ebook != b1);

By changing impl PartialEq for Book to impl PartialEq<BookFormat> for Book, we allow BookFormats to be compared with Books.

A comparison like the one above, which ignores some fields of the struct, can be dangerous. It can easily lead to an unintended violation of the requirements for a partial equivalence relation. For example, if we kept the above implementation of PartialEq<Book> for BookFormat and added an implementation of PartialEq<Book> for Book (either via a #[derive] or via the manual implementation from the first example) then the result would violate transitivity:

#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

#[derive(PartialEq)]
struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

fn main() {
    let b1 = Book { isbn: 1, format: BookFormat::Paperback };
    let b2 = Book { isbn: 2, format: BookFormat::Paperback };

    assert!(b1 == BookFormat::Paperback);
    assert!(BookFormat::Paperback == b2);

    // The following should hold by transitivity but doesn't.
    assert!(b1 == b2); // <-- PANICS
}

§Examples

let x: u32 = 0;
let y: u32 = 1;

assert_eq!(x == y, false);
assert_eq!(x.eq(&y), false);

Required Methods§

1.0.0 · Source

fn eq(&self, other: &Rhs) -> bool

Tests for self and other values to be equal, and is used by ==.

Provided Methods§

1.0.0 · Source

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Trait PartialEqCopy item path

§Cross-crate considerations

§Derivable

§How can I implement PartialEq?

§How can I compare two different types?

§Examples

Required Methods§

fn eq(&self, other: &Rhs) -> bool

Provided Methods§

fn ne(&self, other: &Rhs) -> bool

Implementors§

impl PartialEq for AhoCorasickKind

impl PartialEq for aho_corasick::packed::api::MatchKind

impl PartialEq for aho_corasick::util::error::MatchErrorKind

impl PartialEq for aho_corasick::util::search::Anchored

impl PartialEq for aho_corasick::util::search::MatchKind

impl PartialEq for StartKind

impl PartialEq for Action

impl PartialEq for anstyle_parse::state::definitions::State

impl PartialEq for EvalResult

impl PartialEq for CChar

impl PartialEq for cexpr::token::Kind

impl PartialEq for Tz

impl PartialEq for clang_sys::Version

impl PartialEq for LabelStyle

impl PartialEq for Severity

impl PartialEq for colorchoice::ColorChoice

impl PartialEq for CoderResult

impl PartialEq for DecoderResult

impl PartialEq for EncoderResult

impl PartialEq for Latin1Bidi

impl PartialEq for DwarfFileType

impl PartialEq for Format

impl PartialEq for SectionId

impl PartialEq for Vendor

impl PartialEq for RunTimeEndian

impl PartialEq for AbbreviationsCacheStrategy

impl PartialEq for Pointer

impl PartialEq for gimli::read::Error

impl PartialEq for IndexSectionId

impl PartialEq for ColumnType

impl PartialEq for gimli::read::value::Value

impl PartialEq for ValueType

impl PartialEq for globset::ErrorKind

impl PartialEq for hashbrown::TryReserveError

impl PartialEq for AdditionError

impl PartialEq for CreationError

impl PartialEq for RecordError

impl PartialEq for SubtractionError

impl PartialEq for httparse::Error

impl PartialEq for BaseUnit

impl PartialEq for Kilo

impl PartialEq for humantime::date::Error

impl PartialEq for humantime::duration::Error

impl PartialEq for TrieResult

impl PartialEq for TrieType

impl PartialEq for icu_collections::codepointtrie::error::Error

impl PartialEq for ExtensionType

impl PartialEq for ParserError

impl PartialEq for icu_locid_transform::directionality::Direction

impl PartialEq for TransformResult

impl PartialEq for LocaleTransformError

impl PartialEq for Decomposed

impl PartialEq for BidiPairingProperties

impl PartialEq for PropertiesError

impl PartialEq for GeneralCategory

impl PartialEq for CheckedBidiPairedBracketType

impl PartialEq for BufferFormat

impl PartialEq for DataErrorKind

impl PartialEq for LocaleFallbackPriority

impl PartialEq for LocaleFallbackSupplement

impl PartialEq for DnsLength

impl PartialEq for ErrorPolicy

impl PartialEq for Hyphens

impl PartialEq for ProcessingError

impl PartialEq for ProcessingSuccess

impl PartialEq for WalkState

impl PartialEq for IpAddrRange

impl PartialEq for IpNet

impl PartialEq for IpSubnets

Trait PartialEq

§How can I implement `PartialEq`?